Despite having some troubles with my steel collar last time around, I've decided to give it another go. If I come out in a horrible rash then I definitely have a nickel allergy; if not, then it was just coincidence.

You have to be scientific about these things :)

Only the two sadly - dug out from an old CD

I've signed back up to Gaydar, mostly so I can chat to a couple of friends (silly reason I know!). Now you can find me at:
www.gaydar.co.uk/puploki

As well as:
www.slave4master.com/puploki

And of course, www.puploki.com

Yesterday evening I finally plucked up the courage to stretch my piercing up to the next gauge size (3.2mm). I had the taper all lubed up and it hurt like hell passing through, but I got there in the end. 

Unfortunately I hasn't realised that the recessed end of the taper was too small to accept the internally threaded barbell. I tried to push and shove it through, but it wouldn't go and only resulted in blood & pain.

I gave up in the end, but it's now resulted in a broken cock again. I'm going to order more appropiate hardware and try again next week :)

• The banners at the bottom of each page now rotate around to display different graphics & links to separate sites.
• The XR shop is now branded with the puploki logo and colours :) It also carries my favourite products on the front page.
• Some new ad units will appear on some pages.

My cock seems to have repaired itself, thank fuck. So, now I can play again - I think i'll take it easy for a while though

You may remember the controversy surrounding Brent Corrigan, but it seems as though Cobra Video have fucked up again...

In an industry-wide email, Cobra Video distributor Pacific Sun Entertainment is urging its customers to remove all DVD and VHS copies of  Cobra Video titles Campus Boys 1 and Campus Boys 2 from their shelves.

[Originally from http://www.gayvn.com/index.php?Primary_Navigation=News&Action=View_Article&Content_ID=264720]

I tried out a catheter on myself for the first time last night - everything went swimmingly (got it in ok). It wasn't quite as "dramatic" as I expected - there wasn't an uncontrollable torrent of piss, more of a slow dribble...

Unfortunately, my urethra really hurts today. I think I've just scraped it a bit, and it'll get better in the next day or so.

Gah!

I'm selling my Fuji S602 camera on ebay at the moment - take a look if you want to bid :)

Comes with loads of extras, so it's a great bundle. Happy bidding!

We had a second visit from a goregous sub this evening - he loves rubber, bondage and breath control :) He's also tried electro for the first time and loves that too!

You can find him at www.slave4master.com/naps

Click for more pictures:

This is truly a first.

A vibrating pleasure periscope - it lights up so you can have a good look inside. We shall all call it a pussyscope from now on.

I had an email asking about the replica of Sir's cock being used on me in the stockade set.

We did actually buy a kit to do it, but on reflection, it's probably not all that hard to do if you buy your own materials - it'll be a lot cheaper too.

You'll need:

• Moulding Alginate
• RTV (Room Temperature Vulcanising) silicone casting rubber (the colour is up to you)
• A plastic cylinder about 50-80mm in diameter and 300mm long (or longer if you're especially hung)
• Mixing jug
• Couple of disposable mixing sticks
• Disposable mixing cup
• Disposable gloves

The first step is to take a cast of the cock using the alginate. Follow the instruction on the pack and make up about 0.5l of it. Generally there's an optimum temperature of water to use, around 21°C - but check the pack. It will set within 5-6 minutes, so work fast.

Wet the inside of the plastic cylinder slightly and insert it over your hard cock, make sure there's a good seal round the bottom. Now pour the alginate into the tube, ensuring it completely covers the cock. Make sure the cock is in the middle of the cylinder and not touch the sides.

Wait for the alginate to go off - you need to keep hard during this time :) Plenty of porn, poppers and arse play seems to help. Sitting down also helps!

After 5-6 minutes, go soft and gently pull out.

Now make up the silicone casting rubber according to instructions and pour into the mould. Generally it takes about 24 hours to cure, but check your product.

After it's set, peel off the alginate carefully to extract the cast - give it a wash with some warm soapy water and off you go!

Please bear in mind, this is mostly guesswork (we haven't done it yet!) - don't hold me responsible for chemical burns, cocks stuck in moulding paste or other mishaps ;)

Pictures of me in my new stockade are up in the gallery.

Also, the dildo on the stockade is actually a molding / cast of Sir's cock  I had a dream / fantasy where I was secured in the stockade and kept in place by a silicone copy of Sir... probably best not to explore where that one come from! Anyway, now the dream is a reality and very horny it is too